Skip to main content
Chemistry LibreTexts

Batteries: Electricity though chemical reactions

  • Page ID
    287
  • \( \newcommand{\vecs}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \) \( \newcommand{\vecd}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash {#1}}} \)\(\newcommand{\id}{\mathrm{id}}\) \( \newcommand{\Span}{\mathrm{span}}\) \( \newcommand{\kernel}{\mathrm{null}\,}\) \( \newcommand{\range}{\mathrm{range}\,}\) \( \newcommand{\RealPart}{\mathrm{Re}}\) \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\) \( \newcommand{\Argument}{\mathrm{Arg}}\) \( \newcommand{\norm}[1]{\| #1 \|}\) \( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\) \( \newcommand{\Span}{\mathrm{span}}\) \(\newcommand{\id}{\mathrm{id}}\) \( \newcommand{\Span}{\mathrm{span}}\) \( \newcommand{\kernel}{\mathrm{null}\,}\) \( \newcommand{\range}{\mathrm{range}\,}\) \( \newcommand{\RealPart}{\mathrm{Re}}\) \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\) \( \newcommand{\Argument}{\mathrm{Arg}}\) \( \newcommand{\norm}[1]{\| #1 \|}\) \( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\) \( \newcommand{\Span}{\mathrm{span}}\)\(\newcommand{\AA}{\unicode[.8,0]{x212B}}\)

    Batteries consist of one or more electrochemical cells that store chemical energy for later conversion to electrical energy. Batteries are used in many day-to-day devices such as cellular phones, laptop computers, clocks, and cars. Batteries are composed of at least one electrochemical cell which is used for the storage and generation of electricity. Though a variety of electrochemical cells exist, batteries generally consist of at least one voltaic cell. Voltaic cells are also sometimes referred to as galvanic cells. Chemical reactions and the generation of electrical energy is spontaneous within a voltaic cell, as opposed to the reactions electrolytic cells and fuel cells.

    Introduction

    It was while conducting experiments on electricity in 1749 that Benjamin Franklin first coined the term "battery" to describe linked capacitors. However his battery was not the first battery, just the first ever referred to as such. Rather it is believed that the Baghdad Batteries, discovered in 1936 and over 2,000 years old, were some of the first ever batteries, though their exact purpose is still debated.

    Luigi Galvani (for whom the galvanic cell is named) first described "animal electricity" in 1780 when he created an electrical current through a frog. Though he was not aware of it at the time, this was a form of a battery. His contemporary Alessandro Volta (for whom the voltaic cell and voltaic pile are named) was convinced that the "animal electricity" was not coming from the frog, but something else entirely. In 1800, his produced the first real battery: the voltaic pile.

    In 1836, John Frederic Daniell created the Daniell cell when researching ways to overcome some of the problems associated with Volta's voltaic pile. This discovery was followed by developments of the Grove cell by William Robert Grove in 1844; the first rechargeable battery, made of a lead-acid cell in 1859 by Gaston Plante; the gravity cell by Callaud in the 1860s; and the Leclanche cell by Georges Leclanche in 1866.

    Until this point, all batteries were wet cells. Then in 1887 Carl Gassner created the first dry cell battery, made of a zinc-carbon cell. The nickel-cadmium battery was introduced in 1899 by Waldmar Jungner along with the nickel-iron battery. However Jungner failed to patent the nickel-iron battery and in 1903, Thomas Edison patented a slightly modified design for himself.

    A major breakthrough came in 1955 when Lewis Urry, an employee of what is now know as Energizer, introduced the common alkaline battery. The 1970s led to the nickel hydrogen battery and the 1980s to the nickel metal-hydride battery.

    Lithium batteries were first created as early as 1912, however the most successful type, the lithium ion polymer battery used in most portable electronics today, was not released until 1996.

    Voltaic Cells

    Voltaic cells are composed of two half-cell reactions (oxidation-reduction) linked together via a semipermeable membrane (generally a salt bath) and a wire (Figure 1). Each side of the cell contains a metal that acts as an electrode. One of the electrodes is termed the cathode, and the other is termed the anode. The side of the cell containing the cathode is reduced, meaning it gains electrons and acts as the oxidizing agent for the anode. The side of the cell containing the anode is where oxidation occurs, meaning it loses electrons and acts as the reducing agent for the cathode. The two electrodes are each submerged in an electrolyte, a compound that consists of ions. This electrolyte acts as a concentration gradient for both sides of the half reaction, facilitating the process of the electron transfer through the wire. This movement of electrons is what produces energy and is used to power the battery.

    The cell is separated into two compartments because the chemical reaction is spontaneous. If the reaction was to occur without this separation, energy in the form of heat would be released and the battery would not be effective.

    galvanic cell2.png

    Figure 1: A Zinc-Copper Voltaic cell. The voltaic cell is providing the electricity needed to power the light-bulb.

    Types of Batteries

    batteries 2.jpg

    Figure 2: Primary versus Secondary Batteries. Primary batteries (left) are non-rechargeable and disposable. Secondary batteries (right) are rechargeable, like this cellular phone battery.

    Primary Batteries

    Primary batteries are non-rechargeable and disposable. The electrochemical reactions in these batteries are non-reversible. The materials in the electrodes are completely utilized and therefore cannot regenerate electricity. Primary batteries are often used when long periods of storage are required, as they have a much lower discharge rate than secondary batteries.

    Use of primary batteries is exemplified by smoke detectors, flashlights, and most remote controls.

    Secondary Batteries

    Secondary batteries are rechargeable. These batteries undergo electrochemical reactions that can be readily reversed. The chemical reactions that occur in secondary batteries are reversible because the components that react are not completely used up. Rechargeable batteries need an external electrical source to recharge them after they have expended their energy.

    Use of secondary batteries is exemplified by car batteries and portable electronic devices.

    Battery Cell Types

    Wet Cells

    Wet cell batteries contain a liquid electrolyte. They can be either primary or secondary batteries. Due to the liquid nature of wet cells, insulator sheets are used to separate the anode and the cathode. Types of wet cells include Daniell cells, Leclanche cells (originally used in dry cells), Bunsen cells, Weston cells, Chromic acid cells, and Grove cells. The lead-acid cells in automobile batteries are wet cells.

    100_1409.JPG

    Figure 3: A lead-acid battery in an automobile.

    Dry Cells

    In dry cell batteries, no free liquid is present. Instead the electrolyte is a paste, just moist enough to allow current flow. This allows the dry cell battery to be operated in any position without worrying about spilling its contents. This is why dry cell batteries are commonly used in products which are frequently moved around and inverted, such as portable electronic devices. Dry cell batteries can be either primary or secondary batteries. The most common dry cell battery is the Leclanche cell.

    Battery Performance

    The capacity of a battery depends directly on the quantity of electrode and electrolyte material inside the cell. Primary batteries can lose around 8% to 20% of their charge over the course of a year without any use. This is caused by side chemical reactions that do not produce current. The rate of side reactions can be slowed by lowering temperature. Warmer temperatures can also lower the performance of the battery, by speeding up the side chemical reactions. Primary batteries become polarized with use. This is when hydrogen accumulates at the cathode, reducing the battery's effectiveness. Depolarizers can be used to remove this build up of hydrogen.

    Secondary batteries self-discharge even more rapidly. They usually lose about 10% of their charge each month. Rechargeable batteries gradually lose capacity after every recharge cycle due to deterioration. This is caused by active materials falling off the electrodes or electrolytes moving away from the electrodes.

    Peukert's law can be used to approximate relationships between current, capacity, and discharge time. This is represented by the equation

    \[t = \dfrac{Q_p}{K^k} \nonumber \]

    where I is the current, k is a constant of about 1.3, t is the time the battery can sustain the current, and Qp is the capacity when discharged at a rate of 1 amp.

    Current, Voltage, and Standard Reduction Potential

    There is a significant correlation between a cell's current and voltage. Current, as the name implies, is the flow of electrical charge. Voltage is how much current can potentially flow through the system. Figure 4 illustrates the difference between current and voltage.

    hose2.png

    Figure 4: The difference between voltage and current.

    Water is flowing out of a hose and onto a waterwheel, turning it. Current can be thought of as the amount of water flowing through the hose. Voltage can be thought of as the pressure or strength of water flowing through the hose. The first hose does not have much water flowing through it and also lacks pressure, and is consequently unable to turn the waterwheel very effectively. The second hose has a significant amount of water flowing through it, so it has a large amount of current. The third hose does not have as much water flowing through it, but does have something blocking much of the hose. This increases the pressure of the water flowing out of the hose, giving it a large voltage and allowing the water to hit the waterwheel with more force than the first hose.

    Standard reduction potential, Eo, is a measurement of voltage. Standard reduction potential can be calculated with the knowledge that it is the difference in energy potentials between the cathode and the anode: Eocell = Eocathode − Eoanode. For standard conditions, the electrode potentials for the half cells can be determined by using a table of standard electrode potentials.

    For nonstandard conditions, determining the electrode potential for the cathode and the anode is not as simple as looking at a table. Instead, the Nernst equation must be used in to determine Eo for each half cell. The Nernst equation is represented by , where R is the universal gas constant (8.314 J K-1 mol-1), T is the temperature in Kelvin, n is the number of moles of electrons transferred in the half reaction, F is the Faraday constant (9.648 x 104 C mol-1), and Q is the reaction quotient.

    Different Sizes of Batteries and Some Additional Facts

    Batteries vary both in size and voltage due to the chemical properties and contents within the cell. However, batteries of different sizes may have the same voltage. The reason for this phenomenon is that the standard cell potential does not depend on the size of a battery but rather on its internal content. Therefore, batteries of different sizes can have the same voltage (Figure 5). Additionally, there are ways in which batteries can amplify their voltages and current. When batteries are lined up in a series of rows it increases their voltage, and when batteries are lined up in a series of columns it can increases their current.

    photo.jpg

    Figure 5: Four batteries of different sizes all of 1.5 voltage

    Hazards

    Batteries can explode through misuse or malfunction. By attempting to overcharge a rechargeable battery or charging it at an excessive rate, gases can build up in the battery and potentially cause a rupture. A short circuit can also lead to an explosion. A battery placed in a fire can also lead to an explosion as steam builds up inside the battery. Leakage is also a concern, because chemicals inside batteries can be dangerous and damaging. Leakage emitted from the batteries can ruin the device they are housed in, and is dangerous to handle. There are numerous environmental concerns with the widespread use of batteries. The production of batteries consumes many resources and involves the handling of many dangerous chemicals. Used batteries are often improperly disposed of and contribute to electronic waste. The materials inside batteries can potentially be toxic pollutants, making improper disposal especially dangerous. Through electronic recycling programs, toxic metals such as lead and mercury are kept from entering and harming the environment. Consumption of batteries is harmful and can lead to death.

    Homemade Batteries

    Any liquid or moist object that has enough ions to be electrically conductive can be used to make a battery. It is even possible to generate small amounts of electricity by inserting electrodes of different metals into potatoes, lemons, bananas, or carbonated cola. A voltaic pile can be created using two coins and a paper dipped in salt water. Stacking multiple coins in a series can results in an increase in current.

    Practice Problems

    Problems

    1. Yes/No

    1. Will adding batteries that are lined up in a row amplify the overall voltage of the batteries?
    2. Do electrolytic cells undergo non-spontaneous chemical reactions?
    3. Are rechargeable batteries also known as disposable batteries?
    4. Can batteries of different sizes have the same voltage?

    2. T/F

    1. In primary cells all of the components in the electrodes are almost always completely used.
    2. Primary and secondary cells differ in their cathode and anode properties.
    3. Redox reactions play a critical role in the cells within batteries.
    4. The cathode in a voltaic cell gains electrons.

    3. Determine the standard electrode potential of a voltaic cell within a Leclanche (Dry) cell with half cell voltages of .875V at the graphite cathode and .253V at the zinc anode.

    4. Determine the standard electrode potential with given half cell voltages of .987V at the cathode and .632V at the anode.

    5. Explain why rechargeable batteries might be advantageous over disposable batteries.

    Solutions

    1. Yes/No

    1. Yes
    2. Yes
    3. No
    4. Yes

    2. T/F

    1. True
    2. False
    3. True
    4. True

    3. E0cell=E0(cathode)-E0(anode)

    E0celll= 0.875V - 0.253V = 0.622v

    4. E0cell=E0(cathode)-E0(anode)

    E0cell= 0.987V -0.632V = 0.355V

    5. Even though disposable batteries are cheaper initially and easier to make, the longer lifespan of rechargeable batteries is often more efficient and useful. Rechargeable batteries mean less waste, as less batteries need to be made and less are disposed of in land-fills or through recycling programs. Rechargeable batteries are also more convenient as changing batteries is no longer required. This is especially beneficial in portable electronic devices. Also, because the components in a secondary cell are reusable, rechargeable batteries will generally cost less than disposable batteries in the long run.

    References

    1. Harwood, William, Herring, Geoffrey, Madura, Jeffry, and Petrucci, Ralph. General Chemistry: Principles and Modern Applications. Ninth Edition. Upper Saddle River, New Jersey: Pearson Prentice Hall, 2007.
    2. Kiehne, H.A. Battery Technology Handbook. Second Edition. Renningen-Malsheim, Germany: Expert Verlag, 2003.

    Contributors

    • Abheetinder Brar (UCD)

    Batteries: Electricity though chemical reactions is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by LibreTexts.

    • Was this article helpful?