Interesting online CONFCHEM discussion going on right now on the ChemWiki and
greater STEMWiki Hyperlibary project. Come join the discussion.

ChemWiki: The Dynamic Chemistry Hypertext > Inorganic Chemistry > Coordination Chemistry > Complex Ion Chemistry > The Formation of Complex Ions

The Formation of Complex Ions

Skills to Develop

  • To be introduced to complex ions, including ligands.

Previously, you learned that metal ions in aqueous solution are hydrated—that is, surrounded by a shell of usually four or six water molecules. A hydrated ion is one kind of a complex ion (or, simply, complex), a species formed between a central metal ion and one or more surrounding ligands, molecules or ions that contain at least one lone pair of electrons, such as the [Al(H2O)6]3+ ion.

A complex ion forms from a metal ion and a ligand because of a Lewis acid–base interaction. The positively charged metal ion acts as a Lewis acid, and the ligand, with one or more lone pairs of electrons, acts as a Lewis base. Small, highly charged metal ions, such as Cu2+ or Ru3+, have the greatest tendency to act as Lewis acids, and consequently, they have the greatest tendency to form complex ions.

As an example of the formation of complex ions, consider the addition of ammonia to an aqueous solution of the hydrated Cu2+ ion {[Cu(H2O)6]2+}. Because it is a stronger base than H2O, ammonia replaces the water molecules in the hydrated ion to form the [Cu(NH3)4(H2O)2]2+ ion. Formation of the [Cu(NH3)4(H2O)2]2+ complex is accompanied by a dramatic color change, as shown in Figure 17.3.1. The solution changes from the light blue of [Cu(H2O)6]2+ to the blue-violet characteristic of the [Cu(NH3)4(H2O)2]2+ ion.



Figure 17.3.1: The Formation of Complex Ions. An aqueous solution of CuSO4 consists of hydrated Cu2+ ions in the form of pale blue [Cu(H2O)6]2+ (left). The addition of aqueous ammonia to the solution results in the formation of the intensely blue-violet [Cu(NH3)4(H2O)2]2+ ions, usually written as [Cu(NH3)4]2+ ion (right) because ammonia, a stronger base than H2O, replaces water molecules from the hydrated Cu2+ ion. For a more complete description, see

The Formation Constant

The replacement of water molecules from [Cu(H2O)6]2+ by ammonia occurs in sequential steps. Omitting the water molecules bound to Cu2+ for simplicity, we can write the equilibrium reactions as follows:

\\ \mathrm{[Cu(NH_3)]^{2+}_{(aq)}}+\mathrm{NH_{3(aq)}}&\rightleftharpoons\mathrm{[Cu(NH_3)_2]^{2+}_{(aq)}}\hspace{3mm}K_2
\\ \mathrm{[Cu(NH_3)_2]^{2+}_{(aq)}}+\mathrm{NH_{3(aq)}}&\rightleftharpoons\mathrm{[Cu(NH_3)_3]^{2+}_{(aq)}}\hspace{3mm}K_3
\\ \mathrm{[Cu(NH_3)_3]^{2+}_{(aq)}}+\mathrm{NH_{3(aq)}}&\rightleftharpoons \mathrm{[Cu(NH_3)_4]^{2+}_{(aq)}}\hspace{3mm}K_4 \end{align} \tag{17.3.1}\]

The sum of the stepwise reactions is the overall equation for the formation of the complex ion: The hydrated Cu2+ ion contains six H2O ligands, but the complex ion that is produced contains only four \(NH_3\) ligands, not six.

\[Cu^{2+}_{(aq)} + 4NH_{3(aq)} \rightleftharpoons [Cu(NH_3)_4]^{2+}_{(aq)} \tag{17.3.2}\]

The equilibrium constant for the formation of the complex ion from the hydrated ion is called the formation constant (Kf). The equilibrium constant expression for Kf has the same general form as any other equilibrium constant expression. In this case, the expression is as follows:

\[K_\textrm f=\dfrac{\left[[\mathrm{Cu(NH_3)_4}]^{2+}\right]}{[\mathrm{Cu^{2+}}][\mathrm{NH_3}]^4}=2.1\times10^{13}=K_1K_2K_3K_4\tag{17.3.3}\]


The formation constant (Kf) has the same general form as any other equilibrium constant expression.

Water, a pure liquid, does not appear explicitly in the equilibrium constant expression, and the hydrated Cu2+(aq) ion is represented as Cu2+ for simplicity. As for any equilibrium, the larger the value of the equilibrium constant (in this case, Kf), the more stable the product. With Kf = 2.1 × 1013, the [Cu(NH3)4(H2O)2]2+ complex ion is very stable. The formation constants for some common complex ions are listed in Table 17.3.1.

Table 17.3.1: Formation Constants for Selected Complex Ions in Aqueous Solution*
  Complex Ion Equilibrium Equation Kf
*Reported values are overall formation constants.

Source: Data from Lange’s Handbook of Chemistry, 15th ed. (1999).

Ammonia Complexes [Ag(NH3)2]+ Ag+ + 2NH3 ⇌ [Ag(NH3)2]+ 1.1 × 107
[Cu(NH3)4]2+ Cu2+ + 4NH3 ⇌ [Cu(NH3)4]2+ 2.1 × 1013
[Ni(NH3)6]2+ Ni2+ + 6NH3 ⇌ [Ni(NH3)6]2+ 5.5 × 108
Cyanide Complexes [Ag(CN)2] Ag+ + 2CN ⇌ [Ag(CN)2] 1.1 × 1018
[Ni(CN)4]2− Ni2+ + 4CN ⇌ [Ni(CN)4]2− 2.2 × 1031
[Fe(CN)6]3− Fe3+ + 6CN ⇌ [Fe(CN)6]3− 1 × 1042
Hydroxide Complexes [Zn(OH)4]2− Zn2+ + 4OH ⇌ [Zn(OH)4]2− 4.6 × 1017
[Cr(OH)4] Cr3+ + 4OH ⇌ [Cr(OH)4] 8.0 × 1029
Halide Complexes [HgCl4]2− Hg2+ + 4Cl ⇌ [HgCl4]2− 1.2 × 1015
[CdI4]2− Cd2+ + 4I ⇌ [CdI4]2− 2.6 × 105
[AlF6]3− Al3+ + 6F ⇌ [AlF6]3− 6.9 × 1019
Other Complexes [Ag(S2O3)2]3− Ag+ + 2S2O32− ⇌ [Ag(S2O3)2]3− 2.9 × 1013
[Fe(C2O4)3]3− Fe3+ + 3C2O42− ⇌ [Fe(C2O4)3]3− 2.0 × 1020


Example 17.3.1

If 12.5 g of Cu(NO3)2•6H2O is added to 500 mL of 1.00 M aqueous ammonia, what is the equilibrium concentration of Cu2+(aq)?

Given: mass of Cu2+ salt and volume and concentration of ammonia solution

Asked for: equilibrium concentration of Cu2+(aq)


  1. Calculate the initial concentration of Cu2+ due to the addition of copper(II) nitrate hexahydrate. Use the stoichiometry of the reaction shown in Equation 17.3.2 to construct a table showing the initial concentrations, the changes in concentrations, and the final concentrations of all species in solution.
  2. Substitute the final concentrations into the expression for the formation constant (Equation 17.3.3) to calculate the equilibrium concentration of Cu2+(aq).


Adding an ionic compound that contains Cu2+ to an aqueous ammonia solution will result in the formation of [Cu(NH3)4]2+(aq), as shown in Equation 17.3.2. We assume that the volume change caused by adding solid copper(II) nitrate to aqueous ammonia is negligible.

A The initial concentration of Cu2+ from the amount of added copper nitrate prior to any reaction is as follows:

\[12.5\mathrm{\;\cancel{g}\;Cu(NO_3)_2}\cdot\mathrm{6H_2O}\left(\dfrac{\textrm{1 mol}}{\textrm{295.65} \cancel{g}} \right )\left(\dfrac{1}{\textrm{500}\; \cancel{mL}} \right )\left(\dfrac{\textrm{1000}\; \cancel{mL}}{\textrm{1 L}} \right )=\textrm{0.0846 M}\]

Because the stoichiometry of the reaction is four NH3 to one Cu2+, the amount of NH3 required to react completely with the Cu2+ is 4(0.0846) = 0.338 M. The concentration of ammonia after complete reaction is 1.00 M − 0.338 M = 0.66 M. These results are summarized in the first two lines of the following table. Because the equilibrium constant for the reaction is large (2.1 × 1013), the equilibrium will lie far to the right. Thus we will assume that the formation of [Cu(NH3)4]2+ in the first step is complete and allow some of it to dissociate into Cu2+ and NH3 until equilibrium has been reached. If we define x as the amount of Cu2+ produced by the dissociation reaction, then the stoichiometry of the reaction tells us that the change in the concentration of [Cu(NH3)4]2+ is −x, and the change in the concentration of ammonia is +4x, as indicated in the table. The final concentrations of all species (in the bottom row of the table) are the sums of the concentrations after complete reaction and the changes in concentrations.

Cu2+ + 4NH3 ⇌ [Cu(NH3)4]2+

  [Cu2+] [NH3] [[Cu(NH3)4]2+]
initial 0.0846 1.00 0
after complete reaction 0 0.66 0.0846
change +x +4x x
final x 0.66 + 4x 0.0846 − x


B Substituting the final concentrations into the expression for the formation constant (Equation 17.3.3) and assuming that x << 0.0846, which allows us to remove x from the sum and difference,

\[\begin{align}K_\textrm f&=\dfrac{\left[[\mathrm{Cu(NH_3)_4}]^{2+}\right]}{[\mathrm{Cu^{2+}}][\mathrm{NH_3}]^4}=\dfrac{0.0846-x}{x(0.66+4x)^4}\approx\dfrac{0.0846}{x(0.66)^4}=2.1\times10^{13}

The value of x indicates that our assumption was justified. The equilibrium concentration of Cu2+(aq) in a 1.00 M ammonia solution is therefore 2.1 × 10−14 M.

Exercise 17.3.1

The ferrocyanide ion {[Fe(CN)6]4−} is very stable, with a Kf of 1 × 1035. Calculate the concentration of cyanide ion in equilibrium with a 0.65 M solution of K4[Fe(CN)6].

Answer: 2 × 10−6 M

The Effect of the Formation of Complex Ions on Solubility

What happens to the solubility of a sparingly soluble salt if a ligand that forms a stable complex ion is added to the solution? One such example occurs in conventional black-and-white photography. Recall that black-and-white photographic film contains light-sensitive microcrystals of AgBr, or mixtures of AgBr and other silver halides. AgBr is a sparingly soluble salt, with a Ksp of 5.35 × 10−13 at 25°C. When the shutter of the camera opens, the light from the object being photographed strikes some of the crystals on the film and initiates a photochemical reaction that converts AgBr to black Ag metal. Well-formed, stable negative images appear in tones of gray, corresponding to the number of grains of AgBr converted, with the areas exposed to the most light being darkest. To fix the image and prevent more AgBr crystals from being converted to Ag metal during processing of the film, the unreacted AgBr on the film is removed using a complexation reaction to dissolve the sparingly soluble salt.

The reaction for the dissolution of silver bromide is as follows:

\[AgBr_{(s)} \rightleftharpoons Ag^+_{(aq)} + Br^{−}_{(aq)} \tag{17.3.4a}\]


\[K_{sp} = 5.35 \times 10^{−13} \text{ at 25°C} \tag{17.3.4b}\]

The equilibrium lies far to the left, and the equilibrium concentrations of Ag+ and Br ions are very low (7.31 × 10−7 M). As a result, removing unreacted AgBr from even a single roll of film using pure water would require tens of thousands of liters of water and a great deal of time. Le Châtelier’s principle tells us, however, that we can drive the reaction to the right by removing one of the products, which will cause more AgBr to dissolve. Bromide ion is difficult to remove chemically, but silver ion forms a variety of stable two-coordinate complexes with neutral ligands, such as ammonia, or with anionic ligands, such as cyanide or thiosulfate (S2O32−). In photographic processing, excess AgBr is dissolved using a concentrated solution of sodium thiosulfate.


The reaction of Ag+ with thiosulfate is as follows:

\[Ag^+_{(aq)} + 2S_2O^{2−}_{3(aq)} \rightleftharpoons [Ag(S_2O_3)_2]^{3−}_{(aq)} \tag{17.3.5a}\]


\[K_f = 2.9 \times 10^{13} \tag{17.3.5b}\]

The magnitude of the equilibrium constant indicates that almost all Ag+ ions in solution will be immediately complexed by thiosulfate to form [Ag(S2O3)2]3−. We can see the effect of thiosulfate on the solubility of AgBr by writing the appropriate reactions and adding them together:

\\ \mathrm{Ag^+(aq)}+\mathrm{2S_2O_3^{2-}(aq)}\rightleftharpoons\mathrm{[Ag(S_2O_3)_2]^{3-}(aq)}\hspace{3mm}K_\textrm f&=2.9\times10^{13}
\\ \mathrm{AgBr(s)}+\mathrm{2S_2O_3^{2-}(aq)}\rightleftharpoons\mathrm{[Ag(S_2O_3)_2]^{3-}(aq)}+\mathrm{Br^-(aq)}\hspace{3mm}K&=K_{\textrm{sp}}K_{\textrm f}=15\end{align} \tag{17.3.6}\)

Comparing K with Ksp shows that the formation of the complex ion increases the solubility of AgBr by approximately 3 × 1013. The dramatic increase in solubility combined with the low cost and the low toxicity explains why sodium thiosulfate is almost universally used for developing black-and-white film. If desired, the silver can be recovered from the thiosulfate solution using any of several methods and recycled.


If a complex ion has a large Kf, the formation of a complex ion can dramatically increase the solubility of sparingly soluble salts.

Example 17.3.2

Due to the common ion effect, we might expect a salt such as AgCl to be much less soluble in a concentrated solution of KCl than in water. Such an assumption would be incorrect, however, because it ignores the fact that silver ion tends to form a two-coordinate complex with chloride ions (AgCl2). Calculate the solubility of AgCl in each situation:

  1. in pure water
  2. in 1.0 M KCl solution, ignoring the formation of any complex ions
  3. the same solution as in part (b) except taking the formation of complex ions into account, assuming that AgCl2 is the only Ag+ complex that forms in significant concentrations

At 25°C, Ksp = 1.77 × 10−10 for AgCl and Kf = 1.1 × 105 for AgCl2.

Given: Ksp of AgCl, Kf of AgCl2, and KCl concentration

Asked for: solubility of AgCl in water and in KCl solution with and without the formation of complex ions


  1. Write the solubility product expression for AgCl and calculate the concentration of Ag+ and Cl in water.
  2. Calculate the concentration of Ag+ in the KCl solution.
  3. Write balanced chemical equations for the dissolution of AgCl and for the formation of the AgCl2 complex. Add the two equations and calculate the equilibrium constant for the overall equilibrium.
  4. Write the equilibrium constant expression for the overall reaction. Solve for the concentration of the complex ion.


  1. A If we let x equal the solubility of AgCl, then at equilibrium [Ag+] = [Cl] = x M. Substituting this value into the solubility product expression,
Ksp = [Ag+][Cl] = (x)(x) = x2 =1.77×10−10
x = 1.33×10−5

Thus the solubility of AgCl in pure water at 25°C is 1.33 × 10−5 M.

  1. B If x equals the solubility of AgCl in the KCl solution, then at equilibrium [Ag+] = x  M and [Cl] = (1.0 + x) M. Substituting these values into the solubility product expression and assuming that x << 1.0,
Ksp = [Ag+][Cl] = (x)(1.0 + x) ≈ x(1.0) = 1.77×10−10 = x

If the common ion effect were the only important factor, we would predict that AgCl is approximately five orders of magnitude less soluble in a 1.0 M KCl solution than in water.

  1. C To account for the effects of the formation of complex ions, we must first write the equilibrium equations for both the dissolution and the formation of complex ions. Adding the equations corresponding to Ksp and Kf gives us an equation that describes the dissolution of AgCl in a KCl solution. The equilibrium constant for the reaction is therefore the product of Ksp and Kf:
\\ \mathrm{Ag^+(aq)}+\mathrm{2Cl^{-}}\rightleftharpoons\mathrm{[AgCl_2]^{-}}\hspace{3mm}K_\textrm f&=1.1\times10^{5}
\\ \mathrm{AgCl(s)}+\mathrm{Cl^{-}}\rightleftharpoons\mathrm{[AgCl_2]^{-}}\hspace{3mm}K&=K_{\textrm{sp}}K_{\textrm f}=1.9\times10^{-5}\end{align}\)

D If we let x equal the solubility of AgCl in the KCl solution, then at equilibrium [AgCl2] = x and [Cl] = 1.0 − x. Substituting these quantities into the equilibrium constant expression for the net reaction and assuming that x << 1.0,


That is, AgCl dissolves in 1.0 M KCl to produce a 1.9 × 10−5 M solution of the AgCl2 complex ion. Thus we predict that AgCl has approximately the same solubility in a 1.0 M KCl solution as it does in pure water, which is 105 times greater than that predicted based on the common ion effect. (In fact, the measured solubility of AgCl in 1.0 M KCl is almost a factor of 10 greater than that in pure water, largely due to the formation of other chloride-containing complexes.)

Exercise 17.3.2

Calculate the solubility of mercury(II) iodide (HgI2) in each situation:

  1. pure water
  2. a 3.0 M solution of NaI, assuming [HgI4]2− is the only Hg-containing species present in significant amounts

Ksp = 2.9 × 10−29 for HgI2 and Kf = 6.8 × 1029 for [HgI4]2−.


  1. 1.9 × 10−10 M
  2. 1.4 M

Complexing agents, molecules or ions that increase the solubility of metal salts by forming soluble metal complexes, are common components of laundry detergents. Long-chain carboxylic acids, the major components of soaps, form insoluble salts with Ca2+ and Mg2+, which are present in high concentrations in “hard” water. The precipitation of these salts produces a bathtub ring and gives a gray tinge to clothing. Adding a complexing agent such as pyrophosphate (O3POPO34−, or P2O74−) or triphosphate (P3O105−) to detergents prevents the magnesium and calcium salts from precipitating because the equilibrium constant for complex-ion formation is large:

\[Ca^{2+}_{(aq)} + O_3POPO^{4−}_{4(aq)} \rightleftharpoons  [Ca(O_3POPO_3)]^{2−}_{(aq)} \tag{17.3.7a}\]
   \[K_f = 4\times 10^4\tag{17.3.7b}\]

However, phosphates can cause environmental damage by promoting eutrophication, the growth of excessive amounts of algae in a body of water, which can eventually lead to large decreases in levels of dissolved oxygen that kill fish and other aquatic organisms. Consequently, many states in the United States have banned the use of phosphate-containing detergents, and France has banned their use beginning in 2007. “Phosphate-free” detergents contain different kinds of complexing agents, such as derivatives of acetic acid or other carboxylic acids. The development of phosphate substitutes is an area of intense research.

citric acid.jpg

Commercial water softeners also use a complexing agent to treat hard water by passing the water over ion-exchange resins, which are complex sodium salts. When water flows over the resin, sodium ion is dissolved, and insoluble salts precipitate onto the resin surface. Water treated in this way has a saltier taste due to the presence of Na+, but it contains fewer dissolved minerals.

Another application of complexing agents is found in medicine. Unlike x-rays, magnetic resonance imaging (MRI) can give relatively good images of soft tissues such as internal organs. MRI is based on the magnetic properties of the 1H nucleus of hydrogen atoms in water, which is a major component of soft tissues. Because the properties of water do not depend very much on whether it is inside a cell or in the blood, it is hard to get detailed images of these tissues that have good contrast. To solve this problem, scientists have developed a class of metal complexes known as “MRI contrast agents.” Injecting an MRI contrast agent into a patient selectively affects the magnetic properties of water in cells of normal tissues, in tumors, or in blood vessels and allows doctors to “see” each of these separately (Figure 17.3.2). One of the most important metal ions for this application is Gd3+, which with seven unpaired electrons is highly paramagnetic. Because Gd3+(aq) is quite toxic, it must be administered as a very stable complex that does not dissociate in the body and can be excreted intact by the kidneys. The complexing agents used for gadolinium are ligands such as DTPA5− (diethylene triamine pentaacetic acid), whose fully protonated form is shown here.

DTPA.jpg            17.5.jpg


Figure 17.3.2: An MRI Image of the Heart, Arteries, and Veins. When a patient is injected with a paramagnetic metal cation in the form of a stable complex known as an MRI contrast agent, the magnetic properties of water in cells are altered. Because the different environments in different types of cells respond differently, a physician can obtain detailed images of soft tissues.


  • The formation of complex ions can substantially increase the solubility of sparingly soluble salts if the complex ion has a large Kf.

A complex ion is a species formed between a central metal ion and one or more surrounding ligands, molecules or ions that contain at least one lone pair of electrons. Small, highly charged metal ions have the greatest tendency to act as Lewis acids and form complex ions. The equilibrium constant for the formation of the complex ion is the formation constant (Kf). The formation of a complex ion by adding a complexing agent increases the solubility of a compound.

Conceptual Problems

  1. What is the difference between Keq and Kf?
  2. Which would you expect to have the greater tendency to form a complex ion: Mg2+ or Ba2+? Why?
  3. How can a ligand be used to affect the concentration of hydrated metal ions in solution? How is Ksp affected? Explain your answer.
  4. Co(II) forms a complex ion with pyridine (C5H5N). Which is the Lewis acid, and which is the Lewis base? Use Lewis electron structures to justify your answer.

Numerical Problems

  1. Fe(II) forms the complex ion [Fe(OH)4]2− through equilibrium reactions in which hydroxide replaces water in a stepwise manner. If log K1 = 5.56, log K2 = 4.21, log K3 = −0.10, and log K4 = −1.09, what is Kf? Write the equilibrium equation that corresponds to each stepwise equilibrium constant. Do you expect the [Fe(OH)4]2− complex to be stable? Explain your reasoning.
  2. Zn(II) forms the complex ion [Zn(NH3)4]2+ through equilibrium reactions in which ammonia replaces coordinated water molecules in a stepwise manner. If log K1 = 2.37, log K2 = 2.44, log K3 = 2.50, and log K4 = 2.15, what is the overall Kf? Write the equilibrium equation that corresponds to each stepwise equilibrium constant. Do you expect the [Zn(NH3)4]2+ complex to be stable? Explain your reasoning.
  3. Although thallium has limited commercial applications because it is toxic to humans (10 mg/kg body weight is fatal to children), it is used as a substitute for mercury in industrial switches. The complex ion [TlBr6]3− is highly stable, with log Kf = 31.6. What is the concentration of Tl(III)(aq) in equilibrium with a 1.12 M solution of Na3[TlBr6]?


[Fe(H2O)6]2+(aq) + OH(aq) ⇌ [Fe(H2O(aq))5(OH)] + (aq) + H2O   log K1 = 5.56
[Fe(H2O)5(OH)] + (aq) + OH(aq) ⇌ [Fe(H2O)4(OH)2](aq) + H2O(aq)   log K2 = 9.77
[Fe(H2O)4(OH)2](aq) + OH(aq) ⇌ [Fe(H2O)3(OH)3](aq) + H2O(aq)   log K3 = 9.67
[Fe(H2O)3(OH)3](aq) + OH(aq) ⇌ [Fe(OH)4]2−(aq) + 3H2O(l)   log K4 = 8.58
[Fe(H2O)6]2+(aq) + 4OH(aq) ⇌ [Fe(OH)4]2−(aq) + 6H2O(l)
log Kf = log K1 + log K2 + log K2 + log K4
= 33.58

Thus, Kf = 3.8 × 1033. Because [Fe(OH)4]2− has a very large value of Kf, it should be stable in the presence of excess OH.

You must to post a comment.
Last modified
10:58, 19 Sep 2015


This page has no custom tags.



Creative Commons License Unless otherwise noted, content in the UC Davis ChemWiki is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License. Permissions beyond the scope of this license may be available at Questions and concerns can be directed toward Prof. Delmar Larsen (, Founder and Director. Terms of Use