If you like the ChemWiki, please "like" us on facebook, "share" us on Google+, or "tweet" about the project.
The halogens are located on the left of the noble gases on the periodic table. These five toxic, non-metallic elements make up Group 17 of the periodic table and consist of: fluorine (F), chlorine (Cl), bromine (Br), iodine (I), and astatine (At). Although astatine is radioactive and only has short-lived isotopes, it behaves similar to iodine and is often included in the halogen group. Because the halogen elements have seven valence electrons, they only require one additional electron to form a full octet. This characteristic makes them more reactive than other non-metal groups.
Halogens form diatomic molecules (of the form X2, where X denotes a halogen atom) in their elemental states. The bonds in these diatomic molecules are non-polar covalent single bonds. However, halogens readily combine with most elements and are never seen uncombined in nature. As a general rule, fluorine is the most reactive halogen and astatine is the least reactive. All halogens form Group 1 salts with similar properties. In these compounds, halogens are present as halide anions with charge of -1 (e.g. Cl-, Br-, etc.). Replacing the -ine ending with an -ide ending indicates the presence of halide anions; for example, Cl- is named "chloride." In addition, halogens act as oxidizing agents—they exhibit the property to oxidize metals. Therefore, most of the chemical reactions that involve halogens are oxidation-reduction reactions in aqueous solution. The halogens often form single bonds, when in the -1 oxidation state, with carbon or nitrogen in organic compounds. When a halogen atom is substituted for a covalently-bonded hydrogen atom in an organic compound, the prefix halo- can be used in a general sense, or the prefixes fluoro-, chloro-, bromo-, or iodo- can be used for specific halogen substitutions. Halogen elements can cross-link to form diatomic molecules with polar covalent single bonds.
Chlorine (Cl2) was the first halogen to be discovered in 1774, followed by iodine (I2), bromine (Br2), fluorine (F2), and astatine (At, discovered last in 1940). The name "halogen" is derived from the Greek roots hal- ("salt") and -gen ("to form"). Together these words combine to mean "salt former", referencing the fact that halogens form salts when they react with metals. Halite is the mineral name for rock salt, a natural mineral consisting essentially of sodium chloride (NaCl). Lastly, the halogens are also relevant in daily life, whether it be the fluoride that goes in toothpaste, the chlorine that disinfects drinking water, or the iodine that facilitates the production of thyroid hormones in one's body.
Table 1.1 Electron configurations of the halogens.
1s2 2s2 2p5
[Ar]3d10 4s2 4p5
[Kr]4d10 5s2 5p5
[Xe]4f14 5d10 6s2 6p5
The periodic trends observed in the halogen group:
The melting and boiling points increase down the group because of the van der Waals forces. The size of the molecules increases down the group. This increase in size means an increase in the strength of the van der Waals forces.
F < Cl < Br < I < At
Table 1.2 Melting and Boiling Points of Halogens
|Halogen||Melting Point (˚C)||Boiling Point (˚C)|
The size of the nucleus increases down a group (F < Cl < Br < I < At) because the numbers of protons and neutrons increase. In addition, more energy levels are added with each period. This results in a larger orbital, and therefore a longer atomic radius.
Table 1.3 Atomic Radii of Halogens
|Halogen||Covalent Radius (pm)||Ionic (X-) radius (pm)|
If the outer valence electrons are not near the nucleus, it does not take as much energy to remove them. Therefore, the energy required to pull off the outermost electron is not as high for the elements at the bottom of the group since there are more energy levels. Also, the high ionization energy makes the element appear non-metallic. Iodine and astatine display metallic properties, so ionization energy decreases down the group (At < I < Br < Cl < F).
Table 1.4 Ionization Energy of Halogens
|Halogen||First Ionization Energy (kJ/mol)|
The number of valence electrons in an atom increases down the group due to the increase in energy levels at progressively lower levels. The electrons are progressively further from the nucleus; therefore, the nucleus and the electrons are not as attracted to each other. An increase in shielding is observed. Electronegativity therefore decreases down the group (At < I < Br < Cl < F).
Table 1.5 Electronegativity of Halogens
Since the atomic size increases down the group, electron affinity generally decreases (At < I < Br < F < Cl). An electron will not be as attracted to the nucleus, resulting in a low electron affinity. However, fluorine has a lower electron affinity than chlorine. This can be explained by the small size of fluorine, compared to chlorine.
Table 1.6 Electron Affinity of Halogens
|Halogen||Electron Affinity (kJ/mol)|
The reactivities of the halogens decrease down the group ( At < I < Br < Cl < F). This is due to the fact that atomic radius increases in size with an increase of electronic energy levels. This lessens the attraction for valence electrons of other atoms, decreasing reactivity. This decrease also occurs because electronegativity decreases down a group; therefore, there is less electron "pulling." In addition, there is a decrease in oxidizing ability down the group.
A halide is formed when a halogen reacts with another, less electronegative element to form a binary compound. Hydrogen, for example, reacts with halogens to form halides of the form HX:
Hydrogen halides readily dissolve in water to form hydrohalic (hydrofluoric, hydrochloric, hydrobromic, hydroiodic) acids. The properties of these acids are given below:
Hydrofluoric acid can etch glass and certain inorganic fluorides over a long period of time.
It may seem counterintuitive to say that HF is the weakest hydrohalic acid because fluorine has the highest electronegativity. However, the H-F bond is very strong; if the H-X bond is strong, the resulting acid is weak. A strong bond is determined by a short bond length and a large bond dissociation energy. Of all the hydrogen halides, HF has the shortest bond length and largest bond dissociation energy.
A halogen oxoacid is an acid with hydrogen, oxygen, and halogen atoms. The acidity of an oxoacid can be determined through analysis of the compound's structure. The halogen oxoacids are given below:
In each of these acids, the proton is bonded to an oxygen atom; therefore, comparing proton bond lengths is not useful in this case. Instead, electronegativity is the dominant factor in the oxoacid's acidity. Acidic strength increases with more oxygen atoms bound to the central atom.
Table 1.7 States of Matter and Appearance of Halogens
States of Matter (at Room Temperature)
The halogens' colors are results of the absorption of visible light by the molecules, which causes electronic excitation. Fluorine absorbs violet light, and therefore appears light yellow. Iodine, on the other hand, absorbs yellow light and appears violet (yellow and violet are complementary colors, which can be determined using a color wheel). The colors of the halogens grow darker down the group:
In closed containers, liquid bromine and solid iodine are in equilibrium with their vapors, which can often be seen as colored gases.
*Although the color for astatine is unknown, it is assumed that astatine must be darker than iodine's violet (i.e. black) based on the preceding trend.
As a general rule, halogens usually have an oxidation state of -1. However, if the halogen is bonded to oxygen or to another halogen, it can adopt different states: the -2 rule for oxygen takes precedence over this rule; in the case of two different halogens bonded together, the more electronegative atom takes precedence and adopts the -1 oxidation state.
|Example 1: Iodine Chloride (ICl)|
Chlorine has an oxidation state of -1, and iodine will have an oxidation of +1. Chlorine is more electronegative than iodine, therefore giving it the -1 oxidation state.
|Example 2: Perbromic Acid (HBrO4):|
Oxygen has a total oxidation state of -8 (-2 charge x 4 atoms= -8 total charge). Hydrogen has a total oxidation state of +1. Adding both of these values together, the total oxidation state of the compound so far is -7. Since the final oxidation state of the compound must be 0, bromine's oxidation state is +7.
One third exception to the rule is this: if a halogen exists in its elemental form (X2), its oxidation state is zero.
Table 1.8 Oxidation States of Halogens
|Halogen||Oxidation States in Compounds|
|Chlorine||-1, +1, +3, +5, +7|
|Bromine||-1, +1, +3, +4, +5|
|Iodine||-1, +1,+5, +7|
|Astatine||-1, +1, +3, +5, +7|
Why does fluorine always have an oxidation state of-1 in its compounds?
Electronegativity increases across a period, and decreases down a group. Therefore, fluorine has the highest electronegativity of all of the elements, indicated by its position on the periodic table. Its electron configuration is 1s2 2s2 2p5. If fluorine gains one more electron, the outermost p orbitals are completely filled (resulting in a full octet). Because fluorine has a high electronegativity, it can easily remove the desired electron from a nearby atom. Fluorine is then isoelectronic with a noble gas (with eight valence electrons); all its outermost orbitals are filled. Fluorine is much more stable in this state.
Fluorine: Although fluorine is very reactive, it serves many industrial purposes. For example, it is a key component of the plastic polytetrafluoroethylene (called Teflon-TFE by the DuPont company) and certain other polymers, often referred to as fluoropolymers. Chlorofluorocarbons (CFCs) are organic chemicals that were used as refrigerants and propellants in aerosols before growing concerns about their possible environmental impact led to their discontinued use. Hydrochlorofluorocarbons (HFCs) are now used instead. Fluoride is also added to toothpaste and drinking water to help reduce tooth decay. Fluorine also exists in the clay used in some ceramics. Fluorine is associated with generating nuclear power as well. In addition, it is used to produce fluoroquinolones, which are antibiotics. Below is a list of some of fluorine's important inorganic compounds.
Table 1.9 Important Inorganic Compounds of Fluorine
|Na3AlF6||Manufacture of aluminum|
|CaF2||Optical components, manufacture of HF, metallurgical flux|
|ClF3||Fluorinating agent, reprocessing nuclear fuels|
|HF||Manufacture of F2, AlF3, Na3AlF6, and fluorocarbons|
|LiF||Ceramics manufacture, welding, and soldering|
|NaF||Fluoridating water, dental prophylaxis, insecticide|
|SF6||Insulating gas for high-voltage electrical equipment|
|SnF2||Manufacture of toothpaste|
|UF6||Manufacture of uranium fuel for nuclear reactors|
Chlorine: Chlorine has many industrial uses. It is used to disinfect drinking water and swimming pools. Sodium hypochlorite (NaClO) is the main component of bleach. Hydrochloric acid, sometimes called muriatic acid, is a commonly used acid in industry and laboratories. Chlorine is also present in polyvinyl chloride (PVC), and several other polymers. PVC is used in wire insulation, pipes, and electronics. In addition, chlorine is very useful in the pharmaceutical industry. Medicinal products containing chlorine are used to treat infections, allergies, and diabetes. The neutralized form of hydrochloride is a component of many medications. Chlorine is also used to sterilize hospital machinery and limit infection growth. In agriculture, chlorine is a component of many commercial pesticides: DDT (dichlorodiphenyltrichloroethane) was used as an agricultural insecticide, but its use was discontinued.
Bromine: Bromine is used in flame retardants because of its fire-resistant properties. It also found in the pesticide methyl bromide, which facilitates the storage of crops and eliminates the spread of bacteria. However, the excessive use of methyl bromide has been discontinued due to its impact on the ozone layer. Bromine is involved in gasoline production as well. Other uses of bromine include the production of photography film, the content in fire extinguishers, and drugs treating pneumonia and Alzheimer's disease.
Iodine: Iodine is important in the proper functioning of the thyroid gland of the body. If the body does not receive adequate iodine, a goiter (enlarged thyroid gland) will form. Table salt now contains iodine to help promote proper functioning of the thyroid hormones. Iodine is also used as an antiseptic. Solutions used to clean open wounds likely contain iodine, and it is commonly found in disinfectant sprays. In addition, silver iodide is important for photography development.
Astatine: Because astatine is radioactive and rare, there are no proven uses for this halogen element. However, there is speculation that this element could aid iodine in regulating the thyroid hormones. Also, 211At has been used in mice to aid the study of cancer.
Color wheel referenced to in the text: http://www.wou.edu/las/physci/ch462/c-wheel.gif
1. Why does fluorine always have an oxidation state of -1 in its compounds?
(please highlight to see text) Answer: Electronegativity increases across a period, and decreases down a group. Therefore, fluorine has the highest electronegativity out of all of the elements. Because fluorine has seven valence electrons, it only needs one more electron to acheive a noble gas configuration (eight valence electrons). Therefore, it will be more likely to pull off an electron from a nearby atom.
2. Find the oxidation state of the halogen in each problem:
3. What are three uses of chlorine?
Answer: disinfecting water, pesticides, and medicinal products
4. Which element(s) exist(s) as a solid in room temperature?
Answer: iodine and astatine
5. Do the following increase or decrease down the group of halogens?
a. boiling point and melting point
c. ionization energy
Answer: a. increases b. decreases c. decreases
An NSF funded Project
By STEMWiki Hyperlibrary