If you like us, please share us on social media.
The latest UCD Hyperlibrary newsletter is now complete, check it out.

ChemWiki: The Dynamic Chemistry E-textbook > Physical Chemistry > Thermodynamics > Calorimetry > Virtual: Calorimetry > Heat of Combustion of Methane

Copyright (c) 2006-2014 MindTouch Inc.

This file and accompanying files are licensed under the MindTouch Master Subscription Agreement (MSA).

At any time, you shall not, directly or indirectly: (i) sublicense, resell, rent, lease, distribute, market, commercialize or otherwise transfer rights or usage to: (a) the Software, (b) any modified version or derivative work of the Software created by you or for you, or (c) MindTouch Open Source (which includes all non-supported versions of MindTouch-developed software), for any purpose including timesharing or service bureau purposes; (ii) remove or alter any copyright, trademark or proprietary notice in the Software; (iii) transfer, use or export the Software in violation of any applicable laws or regulations of any government or governmental agency; (iv) use or run on any of your hardware, or have deployed for use, any production version of MindTouch Open Source; (v) use any of the Support Services, Error corrections, Updates or Upgrades, for the MindTouch Open Source software or for any Server for which Support Services are not then purchased as provided hereunder; or (vi) reverse engineer, decompile or modify any encrypted or encoded portion of the Software.

A complete copy of the MSA is available at http://www.mindtouch.com/msa

Heat of Combustion of Methane

Table of Contents


The combustion reaction for methane is

CH4 (g) + 2 O2 (g)   ?   CO2 (g) + 2 H2O (l)

The enthalpy change for this reaction is measured by pressurizing a strong metal reaction vessel (called a bomb) with a mixture of methane and oxygen gas. The bomb is immersed in a calorimeter filled with water. An electrical current is passed through ignition wire (a fine iron wire), which ignites the wire and the gas mixture.

The heat balance for this calorimetry experiment is:

0 = qcal + qwire + qcomb

The heat for the calorimeter, qcal, is determined from the heat capacity of the calorimeter and the temperature change for the calorimetry experiment. Typically the amount of water in the calorimeter is always the same; therefore Ccal includes the heat capacities of the calorimeter, the water, and the bomb itself.

The burning of the ignition wire releases heat, qwire, and this heat must be included in the calculations. (This heat is treated separately, because the amount of ignition wire used varies from one measurement to the next.)

The heat released by the combustion reaction is qcomb, which is related to the molar enthalpy of combustion by

?Hcomb = qcomb


Combustion experiments are general conducted with a large excess of oxygen, so that the fuel (methane in this case) is the limiting reactant.

Combustion reactions are often used to calculate the molar enthalpies of formation. For example, the standard molar enthalpy of combustion for methane can be expressed in terms of the standard molar enthalpies of formation of the reactants and products:

?Hocomb = 2 ?Hof,water + ?Hof,carbon dioxide - ?Hof,methane - 2 ?Hof,oxygen

?Hocomb is measured experimentally.

?Hof,oxygen = 0, because oxygen is a pure element.

The other molar enthalpies of formation are known from independent measurements. For example, one could determine the heat of combustion of hydrogen to obtain the molar enthalpy of formation for water.

For liquid water, ?Hof = -285.8 kJ mole-1

For gaseous carbon dioxide, ?Hof = -393.5 kJ mole-1



  • Determine the molar enthalpy of combustion for methane.
  • Determine the molar enthalpy of formation for methane.


  • Pressurize the bomb with a known amount of methane gas.
  • Observe the temperature of the system before and after the combustion reaction occurs.
  • Calculate the change in temperature for the system.
  • Use the temperature change, the heat capacity for the calorimeter, and the heat released by burning the ignition wire to calculate the heat of combustion.
  • Divide the heat of neutralization by the moles of methane to determine the molar enthalpy of combustion.
  • Use the molar enthalpy of combustion of methane to calculate the molar enthalpy of formation of methane.

Part 1

In this part of the experiment, the calorimeter is filled with 10.0 mmole of methane gas and an excess of oxygen.

When burned, the ignition wire releases 107.2 J of heat

The heat capacity of the calorimeter (including the bomb and water) is 4.319 kJ oC-1.

Part 2

Repeat the measurements made in Part 1 using a different initial pressure of methane gas in the bomb. As in Part 1, a large excess of oxygen is present.

Use the ideal gas law to calculate the amount of methane originally present.

The volume of the bomb is 271 mL.

The heat capacity of the calorimeter (including the bomb and water) is 4.319 kJ oC-1.

A different length of ignition wire is used in each experiment. The heat released by combustion of the ignition wire is shown at the right.

Pressure of

Combustion of the Ignition Wire Releases
Last modified
09:57, 2 Oct 2013


This page has no custom tags.


(not set)
(not set)

Creative Commons License Unless otherwise noted, content in the UC Davis ChemWiki is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License. Permissions beyond the scope of this license may be available at copyright@ucdavis.edu. Questions and concerns can be directed toward Prof. Delmar Larsen (dlarsen@ucdavis.edu), Founder and Director. Terms of Use