If you like us, please share us on social media.

The latest UCD Hyperlibrary newsletter is now complete, check it out.

ChemWiki: The Dynamic Chemistry E-textbook > Physical Chemistry > Thermodynamics > State Functions > Enthalpy

Enthalpy

Enthalpy is the amount of heat content used or released in a system at constant pressure. Enthalpy is usually expressed as the change in enthalpy. The change in enthalpy is related to a change in internal energy (\(U\)) and a change in the volume (\(V\)), which is multiplied by the constant pressure of the system.

Enthalpy (\(H\)) is the sum of the internal energy (\(U\)) and the product of pressure and volume (\(PV\)) given by the equation:

\[H = U + PV\]

When a process occurs at constant pressure, the heat evolved (either released or absorbed) is equal to the change in enthalpy. Enthalpy is a state function which depends entirely on the state functions \(T\), \(P\) and \(U\). Enthalpy is usually expressed as the change in enthalpy (\(\Delta H\)) for a process between initial and final states:

\[\Delta H = ΔU + ΔPV \]

If temperature and pressure remain constant through the process and the work is limited to pressure-volume work, then the enthalpy change is given by the equation:

\[ \Delta H = ΔU + PΔV \]

Also at constant pressure the heat flow (\(q\)) for the process is equal to the change in enthalpy defined by the equation:

\[ \Delta H = q \]

By looking at whether q is exothermic or endothermic we can determine a relationship between \(\Delta H\) and \(q\). If the reaction absorbs heat it is endothermic meaning the reaction consumes heat from the surroundings so \(q > 0\) (positive). Therefore, at constant temperature and pressure, by the equation above, if q is positive then \(\Delta H\) is also positive. And the same goes for if the reaction releases heat, then it is exothermic, meaning the system gives off heat to its surroundings, so \(q < 0\) (negative). If \(q\) is negative, then \(\Delta H\) will also be negative.

When a liquid vaporizes the liquid must absorb heat from its surroundings to replace the energy taken by the vaporizing molecules in order for the temperature to remain constant. This heat required to vaporize the liquid is called enthalpy of vaporization (or heat of vaporization). For example, the vaporization of one mole of water the enthalpy is given as:

ΔH = 44.0 kJ at 298 K

When a solid melts, the required energy is similarly called enthalpy of fusion (or heat of fusion). For example, one mole of ice the enthalpy is given as:

ΔH = 6.01 kJ at 273.15 K

\(\Delta{H} = \Delta{U} + p\Delta{V} \tag{1}\)

Enthalpy can also be expressed as a molar enthalpy, \(\Delta{H}_m\), by dividing the enthalpy or change in enthalpy by the number of moles. Enthalpy is a state function. This implies that when a system changes from one state to another, the change in enthalpy is independent of the path between two states of a system.

If there is no non-expansion work on the system and the pressure is still constant, then the change in enthalpy will equal the heat consumed or released by the system (q).

\(\Delta{H} = q \tag{2}\)

This relationship can help to determine whether a reaction is endothermic or exothermic. At constant pressure, an endothermic reaction is when heat is absorbed. This means that the system consumes heat from the surroundings, so \(q\) is greater than zero. Therefore according to the second equation, the \(\Delta{H}\) will also be greater than zero. On the other hand, an exothermic reaction at constant pressure is when heat is released. This implies that the system gives off heat to the surroundings, so \(q\) is less than zero. Furthermore, \(\Delta{H}\) will be less than zero.

When the temperature increases, the amount of molecular interactions also increases. When the number of interactions increase, then the internal energy of the system rises. According to the first equation given, if the internal energy (\(U\)) increases then the \(\Delta{H}\) increases as temperature rises. We can use the equation for heat capacity and Equation 2 to derive this relationship.

\(C = \dfrac{q}{\Delta{T}}\)

At constant pressure, substitute Equation #2:

\(C_p = \left( \dfrac{\Delta{H}}{\Delta{T}} \right)_P\)

where the subscript \(P\) indicates the derivative is done under constant pressure.

Enthalpy can be represented as the standard enthalpy, \(\Delta{H}^{o}\). This is the enthalpy of a substance at standard state. The standard state is defined as the pure substance held constant at 1 bar of pressure. Phase transitions, such as ice to liquid water, require or absorb a particular amount of standard enthalpy:

*Standard Enthalpy of Vaporization*(\(\Delta{H^o_{vap}}\)) is the energy that must be supplied as heat at constant pressure per mole of molecules vaporized (liquid to gas).

*Standard Enthalpy of Fusion*(\(\Delta{H^o_{fus}}\)) is the energy that must be supplied as heat at constant pressure per mole of molecules melted (solid to liquid).

*Standard Enthalpy of Sublimation*(\(\Delta{H^o_{sub}}\)) is the energy that must be supplied as heat at constant pressure per mole of molecules converted to vapor from a solid.

\[\Delta{H^o_{sub}} = \Delta{H^o_{fus}} + \Delta{ H^o_{vap}}\]

The enthalpy of condensation is the reverse of the enthalpy of vaporization and the enthalpy of freezing is the reverse of the enthalpy of fusion. The enthalpy change of a reverse phase transition is the negative of the enthalpy change of the forward phase transition. Also the enthalpy change of a complete process is the sum of the enthalpy changes for each of the phase transitions incorporated in the process.

- Canagaratna, Sebastian G. "A Visual Aid in Enthalpy Calculations "
*J. Chem. Educ.***2000***77*1178. - Kennedy Sr., Alvin P. "Determination of Enthalpy of Vaporization Using a Microwave Oven "
*J. Chem. Educ.***1997***74*1231. - Treptow, Richard S. "How Thermodynamic Data and Equilibrium Constants Changed When the Standard-State Pressure Became 1 Bar "
*J. Chem. Educ.***1999***76*212. - Yi, L., Sheng-Lu, K., Song-Sheng, Qu. "Some Views in the Internal Energy and Enthalpy of Gases." J. Chem. Educ.
**1995**: 72, 408.

- Atkins, Peter and de Paula, Julio; Physical Chemistry for the Life Sciences, United States, 2006.Katherine Hurley
- Petrucci, et al. General Chemistry Principles & Modern Applications. 9th ed. Upper Saddle River, NJ: Pearson Prentice Hall, 2007

- Calculate the enthalpy (ΔH) for the process in which 45.0 grams of water is converted from liquid at 10° C to vapor at 25° C.

Part 1: Heating water from 10.0 to 25.0 °C

ΔkJ = 45.0g H20 x (4.184J/gH_{2}O °C) x (25.0 - 10.0) °C x 1kJ/1000J = 2.82 kJ

Part 2: Vaporizing water at 25.0 °C

ΔkJ = 45.0 g H_{2}O x 1 mol H_{2}O/18.02 g H_{2}O x 44.0 kJ/1 mol H_{2}O = 110 kJ

Part 3: Total Enthalpy Change

ΔH = 2.82 kJ + 110kJ

- Katherine Hurley (UCD), Jennifer Shamieh (UCD)

Last modified

09:38, 21 Mar 2015

**Analytical Chemistry**

**Biological Chemistry**

**Inorganic Chemistry**

**Organic Chemistry**

**Physical Chemistry**

**Theoretical Chemistry**

**Diablo Valley College**

**Hope College**

**Howard University**

**Purdue University**

**Sacramento City College**

**United Arab Emirates U**

**UC Davis**

**UC Irvine**

**General Chemistry**

**Analytical Chemistry**

**Organic Chemistry**

**Physical Chemistry**

**Theoretical Chemistry**

An NSF funded Project

- © Copyright 2015 Chemwiki

Unless otherwise noted, content in the UC Davis ChemWiki is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License. Permissions beyond the scope of this license may be available at copyright@ucdavis.edu. Questions and concerns can be directed toward Prof. Delmar Larsen (dlarsen@ucdavis.edu), Founder and Director. Terms of Use